Where to mount the injectors

The pH and Chlorine injectors should be mounted after the sensors so as not to interfere with the readings. There is no important order of injection but we usually recommend chlorine is injected before pH- a its acid and could over time damage the injection valve.

The injectors should be mounted vertically and if possible should be higher than the product container or with enough length of tubing (we provide 1.5m of tubing to the peristaltic pump and 1.5m of tubing to the container) to avoid any risk of natural apiration on high pressure systems. Placing BoPi higher in the midle can help avoir this issue too.